Ian West Ian West's Profile Page

Ian West Ian West

0 Course Enrolled • 0 Course Completed

Biography

Free Huawei H12-831_V1.0-ENU Test Questions - New H12-831_V1.0-ENU Braindumps

One can instantly download actual H12-831_V1.0-ENU exam questions after buying them from us. Free demos and up to 1 year of free updates are also available at Free4Torrent. Buy HCIP-Datacom-Advanced Routing & Switching Technology V1.0 (H12-831_V1.0-ENU) practice material now and earn the HCIP-Datacom-Advanced Routing & Switching Technology V1.0 (H12-831_V1.0-ENU) certification exam of your dreams with us!

Huawei H12-831_V1.0 is an advanced-level certification exam that validates the knowledge and skills of candidates in the field of routing and switching technology. H12-831_V1.0-ENU Exam is designed to test the expertise of candidates in planning, configuring, and troubleshooting complex enterprise-level networks. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification is intended for network engineers, network administrators, and network technicians who are responsible for designing and implementing enterprise-level networks.

>> Free Huawei H12-831_V1.0-ENU Test Questions <<

New H12-831_V1.0-ENU Braindumps - Free H12-831_V1.0-ENU Exam Questions

we guarantee to you that our H12-831_V1.0-ENU study questions are of high quality and can help you pass the exam easily and successfully. Our H12-831_V1.0-ENU exam questions boosts 99% passing rate and high hit rate so you needn't worry that you can't pass the exam. Our H12-831_V1.0-ENU Exam Torrent is compiled by experts and approved by experienced professionals and updated according to the development situation in the theory and the practice. Our H12-831_V1.0-ENU guide torrent can simulate the exam and boosts the timing function.

Huawei H12-831_V1.0-ENU Exam is an excellent opportunity for professionals to validate their skills and knowledge in advanced routing and switching technologies. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification can help professionals to differentiate themselves in the job market and increase their job prospects. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification also demonstrates to employers that the candidate has the necessary skills and knowledge to design, configure, and troubleshoot complex networks.

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Sample Questions (Q153-Q158):

NEW QUESTION # 153
In the hub-spoke networking shown in the figure, which of the following commands must be configured on the Hub-PE to ensure correct route transmission?

A. [Hub-PE-bgp-VPN_out] peer x.x.x.x soo 200:1
B. [Hub-PE-bgp-VPN_out] peer x.x.x.x allow-as-loop
C. [Hub-PE-bgp-VPN_in] peer x.x.x.x soo 200:1
D. [Hub-PE-bgp-VPN_in] peer x.x.x.x allow-as-loop

Answer: C

Explanation:
Comprehensive and Detailed In-Depth Explanation:
1. Understanding the Hub-Spoke Network Model in MPLS VPN
* Hub-Spoke (or Route Reflector) topology is used in MPLS Layer 3 VPNs where multiple spoke sites communicate through a central hub.
* The Hub-PE acts as an intermediate BGP speaker and redistributes routes between spokes.
* The challenge is preventing routing loops when exchanging routes between spokes.
2. Understanding the Role of Site of Origin (SoO) in BGP/MPLS VPNs
* BGP Site of Origin (SoO) is a route attribute used to prevent routing loops in scenarios where a hub redistributes routes between spokes.
* If a route originating from a spoke is advertised back to the same site, SoO prevents it from being re-learned.
* The SoO value (e.g., 200:1) ensures that a site does not accept its own previously advertised prefixes.
3. Analyzing the Answer Choices
# A. [Hub-PE-bgp-VPN_out] peer x.x.x.x allow-as-loop (Incorrect)
* The allow-as-loop command allows BGP to accept routes with its own AS number in the AS path.
* This is NOT needed in a Hub-Spoke VPN because BGP routes are not being looped through the same AS.
# This is unnecessary for preventing loops in a Hub-Spoke VPN.
# B. [Hub-PE-bgp-VPN_in] peer x.x.x.x allow-as-loop (Incorrect)
* Again, allow-as-loop is used when a router needs to accept its own AS number in the BGP AS path.
* This is NOT the mechanism used for preventing loops in Hub-Spoke VPNs; SoO is used instead.
# This is not required in this scenario.
# C. [Hub-PE-bgp-VPN_in] peer x.x.x.x soo 200:1 (Correct Answer)
* The correct way to prevent spoke routes from looping through the hub is to apply the Site of Origin (SoO) attribute.
* This command ensures that if a route with SoO 200:1 is received, it is not advertised back to the same spoke.
# This is the correct answer.
# D. [Hub-PE-bgp-VPN_out] peer x.x.x.x soo 200:1 (Incorrect)
* Applying SoO on outgoing routes is NOT effective because the hub should mark received routes and prevent loops when re-advertising them.
* SoO should be applied on the inbound (received) routes at the Hub-PE, not outbound.
# This is not the correct implementation of SoO.
Final Conclusion:
# Correct answer: C. [Hub-PE-bgp-VPN_in] peer x.x.x.x soo 200:1# A. allow-as-loop is unnecessary in a Hub-Spoke MPLS VPN.# B. allow-as-loop is not relevant here.# D. SoO should be applied inbound, not outbound.
Thus, the correct answer is: C. [Hub-PE-bgp-VPN_in] peer x.x.x.x soo 200:1.

NEW QUESTION # 154
In the same environment, engineers A and B execute the tracert command. The destination addresses are the same, but the paths are different. What are the possible reasons?

A. Engineer A's operation error
B. The phenomenon is abnormal, the device has an operating system failure
C. Engineer B's operation error
D. The destination port numbers of the UDR packets serving tracert are different, and the hashes reach different equivalent next hops.

Answer: D

NEW QUESTION # 155
According to the configuration shown in the figure below, you can know that R4 has an interface advertised into IS-IS?

A. 0
B. 1
C. 2
D. 3

Answer: C

NEW QUESTION # 156
According to this figure, which of the following is the correct description of the IPv6 routing information calculated by the R4 router through IS-IS?

A. R4 has 1 IS-IS default route
B. R4 has no IS-IS routing entry
C. R4 has 2 equal-cost IS-IS default routes
D. R4 has 2 unequal IS-IS default routes

Answer: C

NEW QUESTION # 157
display interface GEO/O/O once, and found that the Total Eror count (the total number of error packets at the physical layer of the interface) is not correct. . At this time, it can be concluded that the current time and fall has not disappeared.

A. True
B. False

Answer: A

NEW QUESTION # 158
......

New H12-831_V1.0-ENU Braindumps: https://www.free4torrent.com/H12-831_V1.0-ENU-braindumps-torrent.html

Ian West Ian West

Biography

Customer Support